Thanks to the special step, there’s no slipping backwards when you open up the throttle. Standard height.

Specially designed for riders over 1.80m tall. Approx. 20mm higher than the standard seat.

Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15mm lower than the standard seat.

This seat provides great freedom of movement, but still a perfect hold. The “wave surface” acts as a step even though it isn’t one. Standard height.

All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.7 mm wider contact surface than standard.

All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.

An offroad sortie is no walk in the park! Husaberg aluminium skid plates provide the most effective protection for frame and engine:

• Made from 4mm-thick, high-strength, robust aluminium
• Extremely hard-wearing and endurance-tested for the toughest offroad use
• Precisely fitting design – specially developed for Husaberg models
• Highest quality workmanship
• Quick and simple installation

Reliably prevents damage to the powder coating by dirt, crashes or the rider’s boots. Also protects trousers and boots from burns on the exhaust side.

Protects the fork from damage in the event of a crash. Suitable for all models with 26mm front axle.

Protects the swingarm in the event of a crash.

Developed by Akrapovic in collaboration with the Husaberg Factory Team: the highest quality factory header you can buy for your motorcycle. Top titanium quality and maximum weight reduction are the secrets behind the outstanding successes of the Husaberg Factory Team. The benefits:

• Perceptible increase in performance throughout the rev range
• Made from titanium – that means: ultra-light
• Highest quality workmanship
• Optimum header routing

Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box.

All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.

Specially designed for riders over 1.80m tall. Approx. 20mm higher than the standard seat.

Specially designed for riders over 1.80m tall. Approx. 20mm higher than the standard seat.

Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15mm lower than the standard seat.

3 pieces

3 pieces

3 pieces

Pre-cut sticker, suitable for front and rear rim.

Protects the rear brake disc from stones and other solid objects in the event of a crash or in the heat of battle. Made of high-strength aluminium.

More safety and stability at the fork when you’re riding at speed. The fully adjustable, very lightweight Husaberg steering damper is also unbeatable value for money. The well thought-out mounting of the damper allows individual adjustment of the handlebar, even after installation. Very low profile.

18l, plastic fuel canister for use on the racetrack. Complete with flexible hose and screw cap. Must not be used for storing or transporting fuel in some countries for legal reasons.

The tough Husaberg soft ties allow the bike to be secured without scratching the handlebar or the fuel tank. Made from durable ballistic nylon, they have a load-bearing capacity of 280kg. Dimensions: 3.8cm x 0.6m.

All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.Fits on TE 250/300 as handbrake cylinder and clutch master cylinder.

1l Volume. With scaling for both the fluid level and different mixture ratios. Perfect for changing the oil and for preparing larger quantities of 2-stroke mixture in the canister. Simple handling thanks to the ergonomic design.

Maximum load: 150kg.

The benefits of the Husaberg case guard are:

• Prevents damage to the engine case in the event of the chain breaking
• No pulling-in of stones between chain and engine case (material-friendly)
• CNC-machined from high-strength aluminium
• Best possible and effective protection for the clutch slave cylinder

The benefits of the Husaberg case guard are:

• Prevents damage to the engine case in the event of the chain breaking
• No pulling-in of stones between chain and engine case (material-friendly)
• CNC-machined from high-strength aluminium
• Best possible and effective protection for the clutch slave cylinder

All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.

Bleeder valves specially designed for WP forks. A quick press of the finger and the fork is bled.

Optimum protection against blisters on the thumbs with these coated neoprene rings. Simple to slide onto the grips.

The new generation of Husaberg aluminium skid plates provide the most effective protection for frame and engine:

• New, even more robust, rear fastening clamp
• Made from 4mm-thick, high-strength, robust aluminium
• Side parts welded from inside and out
• Extremely hard-wearing and endurance-tested for the toughest offroad use
• Precisely fitting design – specially developed for Husaberg models
• Highest quality workmanship
• Quick and simple installation

Reliably prevents damage to the powder coating by dirt, crashes or the rider’s boots.

Quick, precise chassis adjustment and improved appearance with the preload adjuster for the shock absorber. The main benefits:

• Quick preload adjustment
• Use of the entire thread length on the shock absorber
• Very simple to use
• Low weight
• Insensitive to dirt
• Mechanical drive mechanism

The shock absorber must be dismantled in order to fit the pre-load adjuster.

The factory shock absorber linkage is the result of very successful teamwork between our factory riders and the specialists in the development department at Husqvarna accessories, and has the following features:

• CNC-machined from high strength aluminum
• Anodized blue

Not only does the factory shock absorber linkage stand out visually, it also has the following benefits:

• Firmer tuning over the entire suspension travel
• Unchanged suspension travel (measured on the shock absorber)
• Unchanged progression curve
• Chassis even more sporty and competitive than standard

Sticker are not included

Specially designed for riders over 1.80m tall. Approx. 20mm higher than the standard seat.