Operating hourmeter with bracket

Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground.

Ever had to give up during a race because of a broken clutch or brake lever? That will never happen again – these levers are designed to fold away on contact with the ground.

This CNC milled handlebar bracket with shock-absorbing rubber inserts protects your wrist and shoulder joints. Other benefits of the PHDS:

• Helps absorb hard shocks
• Absorbs chassis and engine vibrations
• Additional handlebar damping on the horizontal axis
• Optimal steering precision
• Additional absorbing elements available in three different hardnesses (soft, medium, hard) for individual customization
• Replaces the factory-installed rubber damping inserts in the handlebar bracketPHDS handlebar pad: SXS.07.250.800

This battery compartment allows you to install an extra powerful 5S lithium-ion battery in your bike.

The Twinwall, in Husqvarna blue design, combines two handlebars in one: An maximum guaranteed exterior strength against external damage (e.g. falling over) and is also anodized against corrosion. The interior, made of a special alloy, is also hard anodized to protect it from damage by the handlebar controls. Nylon inserts in the inner tube allow thinner walls. This saves weight and has a positive effect on the flexing properties. Rubber seals at the crossing points of the two tubes to prevent the ingress of water, dirt, cleaning agents, and other contaminants. Comes with handlebar padding.

Grip replacement made easy! With the lock-on grips set, the grips are locked onto the handlebar by a clamp. The laborious process of sticking the grips and securing them with wire is no longer necessary.

Protects grip rubbers from grazing in the event of a fall.

The ABS dongle enables additional features in the ABS control unit.

• ABS mode 1:
  • The ABS function is active on the front wheel only (single channel ABS). The rear wheel can lock at any time without engaging the ABS braking.
• ABS mode 2:
  • ABS is switched off. The front and rear wheels can lock at any time without engaging the ABS braking

ABS mode 1 is automatically activated when the dongle is inserted.

Your dealer will have the detailed functional overview for your machine ready for you.

Left-hand version, light and robust.

Ignition curve adjustment made easy! With this switch, you can change the ignition curve conveniently from the handlebar on models featuring a digital box with pre-programmed ignition curves. (whether or not your Husqvarna has pre-programmed ignition curves can be found in the motorcycle owner’s manual).

Prevents the carburettor from icing up in winter riding conditions.

Ensures significantly higher power output and is required for use of the X2 light on all TE models. We also recommend extra power when using other additional electrical components, e.g. fan, heated grips, etc.
Only for use on 2-stroke bikes with electric starter, since a battery is required!

The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:

• Black centre section = maximum strength for optimum protection
• Coloured upper and lower parts = highly flexible, enduring the roughest of treatment

Attached directly at the levers with a special mounting.

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:

• Black centre section = maximum strength for optimum protection
• Coloured upper and lower parts = highly flexible, enduring the roughest of treatment

Attached directly at the levers with a special mounting.

Ignition curve adjustment made easy! With this switch, you can change the ignition curve conveniently from the handlebar.

These handguards developed especially for Husqvarna bikes are an indispensable companion for serious offroad and supermoto use. Together with the sturdy aluminium bracket, the wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.

These handguards developed especially for Husqvarna bikes are an indispensable companion for serious offroad and supermoto use. Together with the sturdy aluminium bracket, the wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.

These handguards developed especially for Husqvarna bikes are an indispensable companion for serious offroad and supermoto use. Together with the sturdy aluminium bracket, the wide, spacious design ensures excellent mobility and maximum protection against impact, flying stones, branches, etc. Cannot be fitted with Twinwall handlebar.

Can be used only in combination with the factory triple clamp.

Counter bearing 772.12.905.444 must be installed for use with TC/FC models starting with MJ 16 and TX 300/FX models starting with MJ 17.

Required for fitting PHDS handlebar support SXS.14.125.200 when using steering damper 813.12.905.000.

These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights. 10 mm

These CNC-machined, high-strength aluminium handlebar risers are extremely robust thanks to their special screw fastening (from below) on the triple clamp. Twisting and bending are therefore practically impossible. Use of these handlebar risers is only possible on CNC-machined triple clamps. Available in three different heights. 20 mm

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:

• Black centre section = maximum strength for optimum protection
• Coloured upper and lower parts = highly flexible, enduring the roughest of treatment

Attached directly at the levers with a special mounting.

Thanks to splitting of the surfaces, these open, very light KTM MX handguards ensure an uncompromising racing look in the angular KTM design. In two-component injection moulding technology:

• Black mid-section = maximum strength for optimum protection
• Coloured top and bottom parts = highly flexible, enduring even the roughest of treatment

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:

• Black centre section = maximum strength for optimum protection
• Coloured upper and lower parts = highly flexible, enduring the roughest of treatment

Mounted directly on the handlebar with a plastic bracket.

Thanks to splitting of the surfaces, these open, very light Husqvarna handguards ensure an uncompromising racing look in the angular Husqvarna design. In two-component injection moulding technology:

• Black centre section = maximum strength for optimum protection
• Coloured upper and lower parts = highly flexible, enduring the roughest of treatment

Mounted directly on the handlebar with a plastic bracket.

This bracket can be screwed onto the voltage regulator, ensuring that the pull switch has an accessible, defined location. Recommended in combination with the Y junction 777.11.979.044.

We recommend use of this auxiliary wiring harness with all power consumers. With this wiring harness, you also have the option of fitting such power consumers as grip heaters or fans to your TC or FC. Please note: The power consumer is now connected directly to the battery. Consequently, the battery is also drained when the engine is not running, unless the consumer is switched off. Options available: Y-distributor 777.11.979.010 or 777.11.979.044.

The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000.

The Y-distributor allows you to connect two power consumers to auxiliary wiring harness 777.11.979.000. The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.

The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

The closed, two-component plastic handguards feature a black centre section that offers maximum strength for optimum protection. The colourful upper and lower parts are highly flexible and endure even the roughest of treatment without complaint. Available in two different heights.

Only for handlebars with an internal diameter of 14.4mm.

Forged Husqvarna accessories brake and clutch lever provide you with the following benefits:

• Made of high quality aluminum, forged and subsequently CNC machined
• The elaborate production process guarantees lasting durability, maximum flexibility and a precision fit
• Ergonomically optimized form
• Predetermined breaking point
• Anodized blue

Forged Husqvarna accessories brake and clutch lever provide you with the following benefits:

• Made of high quality aluminum, forged and subsequently CNC machined
• The elaborate production process guarantees lasting durability, maximum flexibility and a precision fit
• Ergonomically optimized form
• Predetermined breaking point
• Anodized blue

Who hasn’t had to interrupt a training session or even abandon a race due to a snapped throttle cable? This simple-to-fit, aluminium part reduces this risk to a minimum. The protector is simply attached to the throttle cable guide on the throttle grip, thereby preventing the throttle cable from snapping.

• High-strength nylon strap
• Indispensable for use on extreme terrain
• Attaches to fork tube

To assemble the hour counter 813.12.920.000 on the triple clamp.

Ensures warm hands, even in bad weather. May only be fitted by an authorized Husqvarna dealer. We recommend use of auxiliary wiring harness 777.11.979.000 for installation.

• High-strength nylon strap
• Indispensable for use on extreme terrain
• Attaches to fork tube

• High-strength nylon strap
• Indispensable for use on extreme terrain
• Makes it easy to get your bike upright
• Attaches to rear frame